!
!WRF:MEDIATION_LAYER:NESTING
!
SUBROUTINE med_force_domain ( parent_grid , nested_grid ) 1,34
USE module_domain
USE module_configure
USE module_intermediate_nmm
IMPLICIT NONE
TYPE(domain), POINTER :: parent_grid , nested_grid
TYPE(domain), POINTER :: grid
INTEGER nlev, msize
#if !defined(MAC_KLUDGE)
TYPE (grid_config_rec_type) :: config_flags
#endif
! ----------------------------------------------------------
! ------------------------------------------------------
! Interface blocks
! ------------------------------------------------------
INTERFACE
! ------------------------------------------------------
! Interface definitions for EM CORE
! ------------------------------------------------------
#if (EM_CORE == 1)
#if !defined(MAC_KLUDGE)
! ------------------------------------------------------
! These routines are supplied by module_dm.F from the
! external communication package (e.g. external/RSL)
! ------------------------------------------------------
SUBROUTINE interp_domain_em_part1 ( grid, intermediate_grid, ngrid, config_flags &
!
# include "dummy_new_args.inc"
!
)
USE module_domain
USE module_configure
TYPE(domain), POINTER :: grid ! name of the grid being dereferenced (must be "grid")
TYPE(domain), POINTER :: intermediate_grid
TYPE(domain), POINTER :: ngrid
TYPE (grid_config_rec_type) :: config_flags
# include <dummy_new_decl.inc>
END SUBROUTINE interp_domain_em_part1
SUBROUTINE force_domain_em_part2 ( grid, nested_grid, config_flags &
!
# include "dummy_new_args.inc"
!
)
USE module_domain
USE module_configure
TYPE(domain), POINTER :: grid ! name of the grid being dereferenced (must be "grid")
TYPE(domain), POINTER :: nested_grid
TYPE (grid_config_rec_type) :: config_flags
# include <dummy_new_decl.inc>
END SUBROUTINE force_domain_em_part2
! ----------------------------------------------------------
! This routine is supplied by dyn_em/couple_or_uncouple_em.F
! ----------------------------------------------------------
SUBROUTINE couple_or_uncouple_em ( grid, config_flags , couple &
!
# include "dummy_new_args.inc"
!
)
USE module_domain
USE module_configure
TYPE(domain), INTENT(INOUT) :: grid
TYPE (grid_config_rec_type) :: config_flags
LOGICAL, INTENT( IN) :: couple
# include <dummy_new_decl.inc>
END SUBROUTINE couple_or_uncouple_em
#endif
#endif
! ----------------------------------------------------------
! Interface definitions for NMM (placeholder)
! ----------------------------------------------------------
#if (NMM_CORE == 1 && NMM_NEST ==1)
!=======================================================================
! Added for the NMM core. This is gopal's doing.
!=======================================================================
SUBROUTINE force_domain_nmm_part1 ( grid, intermediate_grid, ngrid, config_flags &
!
# include "dummy_new_args.inc"
!
)
USE module_domain
USE module_configure
TYPE(domain), POINTER :: grid ! name of the grid being dereferenced (must be "grid")
TYPE(domain), POINTER :: intermediate_grid
TYPE(domain), POINTER :: ngrid
TYPE (grid_config_rec_type) :: config_flags
# include <dummy_new_decl.inc>
END SUBROUTINE force_domain_nmm_part1
SUBROUTINE before_interp_halos_nmm(grid,config_flags &
!
#include "dummy_new_args.inc"
!
)
USE module_domain
USE MODULE_CONFIGURE
TYPE(domain), POINTER :: grid
TYPE (grid_config_rec_type) :: config_flags
# include <dummy_new_decl.inc>
END SUBROUTINE before_interp_halos_nmm
SUBROUTINE force_domain_nmm_part2 ( grid, nested_grid, config_flags &
!
# include "dummy_new_args.inc"
!
)
USE module_domain
USE module_configure
TYPE(domain), POINTER :: grid ! name of the grid being dereferenced (must be "grid")
TYPE(domain), POINTER :: nested_grid
TYPE (grid_config_rec_type) :: config_flags
# include <dummy_new_decl.inc>
END SUBROUTINE force_domain_nmm_part2
!=======================================================================
! End of gopal's doing.
!=======================================================================
#endif
! ----------------------------------------------------------
! Interface definitions for COAMPS (placeholder)
! ----------------------------------------------------------
#if (COAMPS_CORE == 1)
#endif
END INTERFACE
! ----------------------------------------------------------
! End of Interface blocks
! ----------------------------------------------------------
! ----------------------------------------------------------
! ----------------------------------------------------------
! Executable code
! ----------------------------------------------------------
! ----------------------------------------------------------
! Forcing calls for EM CORE.
! ----------------------------------------------------------
#if (EM_CORE == 1 && defined( DM_PARALLEL ))
# if !defined(MAC_KLUDGE)
CALL model_to_grid_config_rec ( nested_grid%id , model_config_rec , config_flags )
grid => nested_grid%intermediate_grid
# if defined(MOVE_NESTS) || (!defined(SGIALTIX))
CALL alloc_space_field ( grid, grid%id , 1 , 2 , .TRUE. , &
grid%sd31, grid%ed31, grid%sd32, grid%ed32, grid%sd33, grid%ed33, &
grid%sm31, grid%em31, grid%sm32, grid%em32, grid%sm33, grid%em33, &
grid%sp31, grid%ep31, grid%sp32, grid%ep32, grid%sp33, grid%ep33, &
grid%sp31x, grid%ep31x, grid%sp32x, grid%ep32x, grid%sp33x, grid%ep33x,&
grid%sp31y, grid%ep31y, grid%sp32y, grid%ep32y, grid%sp33y, grid%ep33y,&
grid%sm31x, grid%em31x, grid%sm32x, grid%em32x, grid%sm33x, grid%em33x, & ! x-xpose
grid%sm31y, grid%em31y, grid%sm32y, grid%em32y, grid%sm33y, grid%em33y & ! y-xpose
)
# endif
! couple parent domain
grid => parent_grid
! swich config_flags to point to parent rconfig info
CALL model_to_grid_config_rec ( grid%id , model_config_rec , config_flags )
CALL couple_or_uncouple_em ( grid , config_flags , .true. &
!
# include "actual_new_args.inc"
!
)
! couple nested domain
grid => nested_grid
CALL model_to_grid_config_rec ( grid%id , model_config_rec , config_flags )
CALL couple_or_uncouple_em ( grid , config_flags , .true. &
!
# include "actual_new_args.inc"
!
)
! perform first part: transfer data from parent to intermediate domain
! at the same resolution but on the same decomposition as the nest
! note that this will involve communication on multiple DM procs
grid => parent_grid
CALL model_to_grid_config_rec ( grid%id , model_config_rec , config_flags )
!
! Added following line to handle adaptive time step. This should probably
! go somewhere else, but I'm not sure where.
!
! T. Hutchinson, WSI 1/23/07
!
nested_grid%intermediate_grid%dt = grid%dt
CALL interp_domain_em_part1 ( grid , nested_grid%intermediate_grid, nested_grid, config_flags &
!
# include "actual_new_args.inc"
!
)
grid => nested_grid%intermediate_grid
! perform 2nd part: run interpolation on the intermediate domain
! and compute the values for the nest boundaries
! note that this is all local (no communication)
CALL model_to_grid_config_rec ( nested_grid%id , model_config_rec , config_flags )
CALL force_domain_em_part2 ( grid, nested_grid, config_flags &
!
# include "actual_new_args.inc"
!
)
! uncouple the nest
grid => nested_grid
CALL model_to_grid_config_rec ( grid%id , model_config_rec , config_flags )
CALL couple_or_uncouple_em ( grid , config_flags , .false. &
!
# include "actual_new_args.inc"
!
)
! uncouple the parent
grid => parent_grid
CALL model_to_grid_config_rec ( grid%id , model_config_rec , config_flags )
CALL couple_or_uncouple_em ( grid , config_flags , .false. &
!
# include "actual_new_args.inc"
!
)
IF ( nested_grid%first_force ) THEN
nested_grid%first_force = .FALSE.
ENDIF
nested_grid%dtbc = 0.
!
grid => nested_grid%intermediate_grid
# if defined(MOVE_NESTS) || (!defined(SGIALTIX))
CALL dealloc_space_field ( grid )
# endif
# endif
#endif
! ------------------------------------------------------
! End of Forcing calls for EM CORE.
! ------------------------------------------------------
! ------------------------------------------------------
! ------------------------------------------------------
! Forcing calls for NMM. (Placeholder)
! ------------------------------------------------------
# if (NMM_CORE == 1 && NMM_NEST == 1)
!=======================================================================
! Added for the NMM core. This is gopal's doing.
!=======================================================================
CALL model_to_grid_config_rec ( nested_grid%id , model_config_rec , config_flags )
grid => nested_grid%intermediate_grid
!dusan orig CALL alloc_space_field ( grid, grid%id , 1 , 2 , .TRUE. , &
#if defined(MOVE_NESTS) || (!defined(SGIALTIX))
CALL ensure_space_field &
( grid, grid%id , 1 , 3 , .FALSE. , &
grid%sd31, grid%ed31, grid%sd32, grid%ed32, grid%sd33, grid%ed33, &
grid%sm31, grid%em31, grid%sm32, grid%em32, grid%sm33, grid%em33, &
grid%sp31, grid%ep31, grid%sp32, grid%ep32, grid%sp33, grid%ep33, &
grid%sp31x, grid%ep31x, grid%sp32x, grid%ep32x, grid%sp33x, grid%ep33x,&
grid%sp31y, grid%ep31y, grid%sp32y, grid%ep32y, grid%sp33y, grid%ep33y,&
grid%sm31x, grid%em31x, grid%sm32x, grid%em32x, grid%sm33x, grid%em33x, & ! x-xpose
grid%sm31y, grid%em31y, grid%sm32y, grid%em32y, grid%sm33y, grid%em33y & ! y-xpose
)
#endif
nested_grid%intermediate_grid%interp_mp=parent_grid%interp_mp .or. nested_grid%interp_mp
! couple parent domain
! grid => parent_grid
! swich config_flags to point to parent rconfig info
! CALL model_to_grid_config_rec ( grid%id , model_config_rec , config_flags )
! on restart do not force the nest the first time since it has already been forced
! prior to the writing of the restart file
! IF ( .NOT. ( config_flags%restart .AND. nested_grid%first_force ) ) THEN
! couple nested domain
grid => nested_grid
CALL model_to_grid_config_rec ( grid%id , model_config_rec , config_flags )
! Apply halos on weights and indices:
call before_interp_halos_nmm(grid,config_flags &
!
# include "actual_new_args.inc"
!
)
! Copy interpolation information from parent grid to intermediate grid:
! grid => parent_grid
! call parent_to_inter_part1(parent_grid, nested_grid%intermediate_grid, &
! nested_grid, config_flags)
! grid => nested_grid%intermediate_grid
! call parent_to_inter_part2(nested_grid%intermediate_grid, config_flags)
! Transfer remaining information from parent to intermediate grid:
grid => parent_grid
CALL model_to_grid_config_rec ( grid%id , model_config_rec , config_flags )
CALL force_domain_nmm_part1 ( grid , nested_grid%intermediate_grid, &
nested_grid, config_flags &
!
# include "actual_new_args.inc"
!
)
grid => nested_grid%intermediate_grid
IF ( .NOT. ( config_flags%restart .AND. nested_grid%first_force ) ) THEN
! Finish transfering information from parent to intermediate
! grid, then run interpolation on the intermediate domain and
! compute the values for the nest boundaries.
CALL model_to_grid_config_rec ( nested_grid%id , model_config_rec , config_flags )
CALL force_domain_nmm_part2 ( grid, nested_grid, config_flags &
!
# include "actual_new_args.inc"
!
)
ENDIF ! not restart and first_force
IF ( nested_grid%first_force ) THEN
nested_grid%first_force = .FALSE.
ENDIF
nested_grid%dtbc = 0.
!
grid => nested_grid%intermediate_grid
!=======================================================================
! End of gopal's doing.
!=======================================================================
# endif
! ------------------------------------------------------
! End of Forcing calls for NMM.
! ------------------------------------------------------
! ------------------------------------------------------
! ------------------------------------------------------
! Forcing calls for COAMPS. (Placeholder)
! ------------------------------------------------------
# if (COAMPS_CORE == 1)
# endif
! ------------------------------------------------------
! End of Forcing calls for COAMPS.
! ------------------------------------------------------
RETURN
END SUBROUTINE med_force_domain